Last time I showed you how to prepare the arm. In this post I will show you the steps to get the weapon ready.
The first step is to cut off the pistol grip and finger guard from the gun. Once you have done this clean up the area and make sure you have a nice level place to work with.
Next measure where you want the hole to go. I did this by holding the weapon up to the arm with the magnet in it and eyeballing it. It wasn’t too difficult.
Next drill your hole and insert the magnet. Note this magnet has the shiny side out instead of the colored. This means the magnets will stick together. I find that color coding one side of the magnet makes this process super easy.
Next time I will show you the completed product and give you a link to where you can download the entire tutorial on making swappable magnets.
Related posts:
- Swappable Weapons – part 3 Last time I showed you the magnets you would need to make swappable weapon arms. Today I will show you the process of putting them...
- Swappable Weapons – Part 2 In the last post I talked about why I was going to be doing this and with what – magnets. In this post I will...
- Swappable Weapons – Part 1 As I started planning out my army I ran into a dilemma. Each unit has several different options for special weapons (flamers, rocket launchers, plasma...
- Swappable Weapons – Part 6 In this post I will show you the first steps in magnetizing an individual weapon. The first thing you need to do is find your...
- Swappable Weapons – part 4 In the previous posts I showed you how to magnetize your troop arms so you could swap out special weapons. Today I will show you...
Thanks for quick answer! If soon you will have...
Most Popular